Hydranautics ultrafiltration membranes continuously meet and satisfy the increasing demands of the water treatment industry through their high productivity, outstanding performance, salt rejection, productivity, and savings. These membranes set high performance standards for the reverse osmosis membrane elements which deliver the highest salt rejection rates available. They can range in size from 4” to 8” elements, delivering the highest levels of salt rejection and an always pure end product. They are designed to accommodate varying levels of seawater salinities worldwide with dependable field-proven performance.
Hydranautics ultrafiltration membranes lower fouling in waste and surface water while having a high fouling potential for reuse and reclaimed applications. These membranes offer superior membrane technology to lower membrane fouling and treatments to treat difficult feed and municipal wastewater. To this point, these applications have significantly required a pretreatment before exposing them to a composite polyamide membrane. These membranes are manufactured with a thicker brine spacer which reduces the Delta P, meeting the increased demand for reduced fouling membranes. This permits a lesser need for frequent cleanings while maintaining a high permeate flow.
Hydranautics Standard Features
· High Rejection
· Sea Water Membranes
· LFC Membranes for Low Fouling
· SanRO Membranes for Sanitary or Full Fit
Pure Aqua delivers a wide range of Hydranautics ultrafiltration membranes which are based on polymeric hollow fibers. Our selection of membranes can be substituted for conventional purification systems and combines the advantages of great permeate quality and low footprint prerequisites. With the incorporation of Hydranautics ultrafiltration modules, reverse osmosis membranes can be utilized at the ground level while functioning at higher fluxes with greater durations between cleans.
Hydranautics ultrafiltration membranes are created through unadulterated chemicals that use situ polymer structure formation and a single-step patented manufacturing procedure. Produced for inside/out flow configuration, the inside surface of the capillary thoroughly unmarked during the manufacturing process, providing a fault-free, steady fiber structure, toughness and high surface integrity throughout the fiber. These particular features make the HYDRAcap ultrafiltration membranes are perfect obstacles for bacteria, viruses, and other micropollutants.
HYDRANAUTICS BASIC FEATURES
High Salt Rejection
LFC Membranes for Minimum Fouling
SanRO Membranes for Sanitary or Full Fit
HYDRACAP SERIES ULTRAFILTRATION MEMBRANES
HYDRAcap is utilized to remedy water from any source such as seawater, brackish water, or tap water as either pretreatment or primary treatment to nanofiltration or reverse osmosis. HYDRAcap provides better features in comparison to conventional pretreatment since it allows greater fluxes for reverse osmosis and nanofiltration systems while preserving longer intervals between cleanings. Occasionally, it substitutes customary pretreatment for movable applications, water recycling, and brackish water rejuvenating.
HYDRAcap improves reverse osmosis and nanofiltration element system composition and running status when used as pretreatment for salt removal, surface water treatment, municipal and industrial treatment. Here are some of the benefits HYDRAcap ultrafiltration membranes offers:
Reduced fouling membranes
Resistance to oxidants such as peroxide and chlorine
High acid tolerance
Removal of micropollutants such as bacteria, viruses giardia, etc.
Reduction of turbidity
Eliminates up to 65% of total organic carbon
Tough and reliable fiber structure
Durable fiber structure,
Robust module design with light and solid construction
20+ years of experience in the capillary membrane production industry
Low Energy/High Flow Tap & Brackish Water Thin Film Membranes
High Rejection Tap & Brackish Water Thin Film Membranes