In addition to the full line of high pressure & low pressure vessels from Protec and Codeline, Pure Aqua offers its own brand of 4” diameter pressure vessels in stainless steel (SS) and fiberglass (FRP).
Pure Aqua brand 4” diameter FRP vessels are available to house 1, 2 or 3 (4”x40”) membrane elements. 4” diameter SS vessels are made for 4021, 4040 and (2) 4040 element configurations.
Pure Aqua pressure vessels are designed to provide safe operation over a long service life if properly installed, operated, and maintained. The vessel may cause loss of life, severe bodily harm, or property damage if not correctly installed, operated, or maintained. Read and understand all guidelines provided in the pressure vessel User Guide. Observe every precaution contained therein. Failure to do so may result in malfunction and potential catastrophic failure. Qualified technicians experienced in servicing hydraulic systems should be used to work with this vessel. Misuse, incorrect assembly, or use of damaged/corroded components may result in catastrophic failure.
The PROTEC™ Model PRO-8-600-SP is designed for continuous use as housing for membrane filtration elements to purify typical brackish waters at any positive pressure up to 600 PSI. The PRO-8-600-SP will accommodate any make of eight-inch nominal diameter spiral-wound element as well as many hollow fiber elements. The element interface hardware for the specified element is supplied with the vessel. The Model PRO-8-600-SP has been designed to meet the standards of the American Society of Mechanical Engineers (ASME), Boiler and Pressure Vessel Code, Section X. At an additional cost, vessels can be inspected during fabrication by an ASME Authorized Inspector and Code stamped.
CodeLine membrane housings, the world's most preferred housing brand is a product of Pentair Water. CodeLine aims at maximizing the performance of your water purification system in critical and demanding applications like Desalination, Reverse Osmosis, Nano filtration, Ultra filtration and Micro filtration. CodeLine manufactures its product to the highest standards of safety in accordance with the engineering standards of the Boiler and Pressure Vessel Code of ASME (American Society of Mechanical Engineers). CodeLine manufacturing adheres to the internationally recognized system of quality standard - ISO 9001:2000. Few models of CodeLine are certified by PED (CE Marking - Europe) and NSF-61 (USA). Codeline Pressure Vessels are available in pressure ranging from 150 psi to 1200 psi.
Pure Aqua carries Stainless Steel (SS), and Fiberglass (FRP) pressure vessels in a wide variety of sizes, end cap styles, pressure ratings, and side or end entry designs. These pressure vessels have
Each housing is individually pressure tested