Sub Title: Antiscalants RO Chemicals
Without RO chemicals, even the highest quality membranes begin to foul after prolonged use, requiring cleaning or replcement. This process is not only time consuming, but can be extremely expensive. PA0100 antiscalant is used to process very poor quality feed water at very high rates of recovery, which lessens the load on your membranes, making them last longer. When used properly, PA0100 antiscalant chemical extends the time between membrane cleanings from a few weeks to years in some cases. Antiscalant and other RO chemicals dramatically increase the lifespan of your membranes, making them last longer and saving you money. In some circumstances, PA0100 can maintain a single set of membranes indefinitely. Without antiscalant, membrane systems would not be successful in serving the water treatment industry.
Category: Chemicals and Dosing Systems > RO Chemicals
Brand: Pure Aqua
Other Names: RO Chemicals, Reverse Osmosis Antiscalant, Membrane Chemicals, RO Membrane Chemicals, Antifoulant Chemicals, Nanofiltration Chemicals, TFC Membrane Chemicals, Seawater Antiscalant
When it comes to troubleshooting reverse osmosis membranes, identifying issues that cause increases in pressure or decreases in product quality can be very difficult. The great thing about PA0100 is that it solves a number of problems simultaneously, saving you headache and preserving your reverse osmosis membranes. As a general cleaning and quality enhancing purification product, antiscalant is the go-to problem solver that ensures the quality and productivity you deserve.
PA0100 is a great product that can be used on almost any water without needing to pay for a water chemistry report. For small systems treating less than 150 gpm feed, we suggest 3-5 ppm doses to begin. PA0100 is also an excellent choice for larger systems with good pilot test results or stable operating history.
Pure Aqua’s PA0100 Antiscalant Chemicals offer superior quality performance characteristics over a range of applications. The antiscalant chemical from Pure Aqua, Inc. is designed to eliminate scale and reduce fouling in membrane systems. Pure Aqua, Inc. PA0100 is a liquid antiscalant/dispersant blended to inhibit scale and disperse colloidal particles in cellulose acetate and thin film membrane separation systems. The formulation has been certified by the National Sanitation Foundation (NSF) under ANSI/NSF Standard 60 for use in producing potable water.
The typical dosing range for antiscalant is between 2 to 10 ppm. If dilution is required, PA0100 should be diluted with de-mineralized water or RO permeate. If neither of these water sources is available, softened water may be substituted. The dilution for PA0100 should not exceed 10% by weight.
|pH (2% solution):
||5.0 - 6.5
|Specific gravity @ 20°C:
||1.1 ± 0.05
Packaging and Storage
Standard regional pack sizes are listed below. Custom packaging can be provided worldwide to meet customer needs. Information on drum-less or bulk tanker delivery is available upon request.
- Antiscalant is a powerful inhibitor against a variety of scales including:
- CaCO3 CCPP>900
- CaSO4 3.0 x Ksp
- BaSO4 105 x Ksp
- SrSO4 20 x Ksp
- CaF 1000 x Ksp
- SiO2 120ppm
- Highly effective at low dose rates in a wide range of feed water types and pH ranges.
- Compatible with polyelectrolytes
- Provides both scale and inorganic fouling control.
- Compatible with all membrane types
PA0100 performance is achieved when the chemical is injected upstream of the membrane system and where possible of cartridge filters. Any industry or application where reverse osmosis membranes or catridge filters are used is an excellent place for an antiscalant dosing system.
Works perfect for my water brand
For my NSF certification this product has been doing good. No rejection for water quality.
by: Sid from