Other DUPONT FILMTEC Membranes

FilmTec elements from Dupont feature a spiral wound design and are based on the FT30 thin-film composite polyamide membrane, which has long been the industry standard for RO performance. The FilmTec FT30 membrane consists of three layers: an ultra-thin polyamide barrier layer, a microporous polysulfone interlayer, and a high-strength polyester support web. The FT30 membrane has been continuously updated and refined to provide higher rejection, improved membrane flux, and low fouling performance. Today's FT30 membrane is uniquely uniform in performance and quality, without the taped or glued defects that can cause other membranes to fail. Good understanding and execution of the basics of reverse osmosis can minimize troublesome and costly problems in the future.

DUPONT FILMTEC ECO-400i MEMBRANE

FILMTEC ECO-400i MEMBRANE

• Flow Rate: 11,500 GPD
• Max. Pressure: 600 PSI

• Pressure Drop: 15 psig
• Max. Temperature: 113°F

DUPONT FILMTEC ECO-440i MEMBRANE

FILMTEC ECO-440i MEMBRANE

• Permeate: 11,500 GPD
• Max. Pressure: 600 PSI

• Pressure Drop: 15 psig
• Max. Temperature: 113°F

DUPONT FILMTEC HSRO-390-FF MEMBRANE

FILMTEC HSRO-390-FF MEMBRANE

• Permeate: 2,650 GPD
• Max. Pressure: 600 PSI

• Pressure Drop: 15 psig
• Max. Temperature: 113°F

DUPONT FILMTEC HSRO-4040-FF MEMBRANE/a>

FILMTEC HSRO-4040-FF MEMBRANE

• Permeate: 1,900 GPD
• Max. Pressure: 600 PSI

• Pressure Drop: 15 psig
• Max. Temperature: 113°F

DUPONT FILMTEC RO-390-FF MEMBRANE

FILMTEC RO-390-FF MEMBRANE

• Permeate: 13,700 GPD
• Max. Pressure: 600 PSI

• Pressure Drop: 15 psig
• Max. Temperature: 113°F

DUPONT FILMTEC RO-390-FF MEMBRANE

FILMTEC RO-390-FF MEMBRANE

• Permeate: 13,700 GPD
• Max. Pressure: 600 PSI

• Pressure Drop: 15 psig
• Max. Temperature: 113°F

DUPONT FILMTEC RO-4040-FF MEMBRANE

FILMTEC RO-4040-FF MEMBRANE

• Permeate: 2,400 GPD
• Max. Pressure: 600 PSI

• Pressure Drop: 15 psig
• Max. Temperature: 113°F