Models: 160E30, 160E120
CodeLine™ is working with some of the world leaders in the membrane industry to make 16” Technology a possibility. 16” Membrane Housings can accomodate four times higher flow rates when compared to the standard 8” vessels.
Uses for Codeline 160E Series Membrane Housings
The CodeLineTM 160E Series is a standardized family of fiberglass pressure vessels designed for continuous, long-term use as housings for reverse osmosis, nano-filtration, ultra-filtration and micro-filtration membranes. Any make of a sixteen-inch diameter spiral-wound membrane element is easily accommodated.
The CodeLineTM 160E Series is designed for different pressure ratings. They are unified in design and have maximum number of parts in common. Each model has the appropriate strength and materials of construction to provide years of continuous use in typical service when properly maintained. Each model is available in lengths to house from one to seven 40-inch long membrane elements.
The CodeLineTM 160E Series is designed and built in accordance with the engineering standards of the Boiler and Pressure Vessel Code of the American Society of Mechanical Engineers (ASME Code). A vessel marked with ASME Code stamp is accepted worldwide as being built to the highest standard of safety.
Each model in the CodeLineTM 160E Series has passed rigorous ASME Code qualification tests, which require that vessels not burst at less than six times their design pressure. Safe use is further assured in that vessels will not fail catastrophically; overpressure is relieved by weeping through the fiberglass shell. Also, every production vessel is hydro-tested to verify structural integrity.
|Model||# of Elements||Operating Pressure||Max. Operating Temperature||Qualification Pressure|
|160E30||1-8||300 psi / 20 bar||120F / 49C||1800 psi / 124 bar|
|160E120||1-8||1200 psi / 82 bar||120F / 49C||7200 psi / 496 bar|
- End Entry Design
- Available in pressure rating of 300psi & 1200psi
- Can accommodate any standard make of 16” Membrane Element
- Mirror finish I.D for easy & quick loading & unloading of membranes.
- High operation temperature upto 120ËšF comes as a standard feature.
- Manufactured as per ASME Section X guidelines.
- Available for both brackish water and sea water applications.