Hanna Conductivity/TDS Meters

Product Description

Hanna's comprehensive line of Conductivity and TDS meters offer dedicated single parameter instruments, as well as multiparameter instruments that support up to eight parameters including salinity and resistivity.

[custom-specifications]

SPecifications

SKU: HI 9813-6
TDS Range: 0 to 1999 mg/L (ppm)
TDS Resolution: 1 mg/L (ppm)
TDS Accuracy (@25°C/77°F): ±2% F.S.
TDS Conversion Factor: 0.65
Temperature Compensation: Automatic from 5 to 50°C (41 to 122°F) with ß =2%/ºC
Calibration: Manual, with CAL trimmer
Dosing Relay: Maximum 2A (fuse protected), 250 Vac, 30 VDC Contact close when measure: > setpoint
Overtime: Adjustable, typically from 5 to approximately 30 minutes
Power Supply: Models “-0”: 12 VDC adapter (included) models “-1”: 115/230 VAC; 50/60Hz
Dimensions: 83 x 53 x 99 mm (3.3 x 2.1 x 3.9’’)
Weight: Models “-0”: 200 g (7.1 oz.) models “-1”: 300 g (10.6 oz.)
Ordering Information: Supplied with mounting brackets, transparent cover and instruction manual.
Recommended Probe: HI7634-00 EC/TDS probe with internal temperature sensor and 2 m (6.6’) cable (not included).

[/custom-specifications]

[custom-features]

Product Features

Water resistant
On-screen user guides: Save time with on-screen calibration guides
Exclusive CAL CHECK™ feature: Alerts users of calibration status (HI 9813-6 only)
BEPS: BEPS (Battery Error Protection System) alerts the user in the event that low battery power could adversely affect readings
Switch parameters at the touch of a button
Automatic Temperature Compensation: For pH and conductivity
Simple calibration Dials located on the front panel makes calibration quick and simple, even for non-technical users
Battery % displayed on startup
Fast response probe included

[/custom-features]

[custom-usage]