Products

Commercial Reverse Osmosis Systems RO-200 Series
commercial brackish and tap water RO-200 series, 600 - 15,000 GPD, made in USA by Pure Aqua, Inc. commercial brackish and tap water RO-200 series, 600 - 15,000 GPD, made in USA by Pure Aqua, Inc.
Commercial Brackish & Tap Water RO-200 Series, 600 - 15,000 GPD | Made in USA by Pure Aqua, Inc.

Our RO-200 series commercial reverse osmosis units are manufactured to meet important matters such as long-term reliability, user friendly, environmental friendly, and robust construction. One of our most popular series, the RO-200 units are great for most standard and individual commercial needs. This unit usually comes standard with multimedia and activated carbon pre-filters, a water softener with brine tank, and a UV sterilizer. This unit can also be customized to add chemical dosing, feed and back wash pumps, antiscalant and more. The RO-200 units are used to purify water and remove salts and other impurities. It is also capable of rejecting bacteria, sugars, proteins, particles, dyes, and other constituents that have a molecular weight of greater than 150-250 daltons.

Water Sources & Purification 

Reverse osmosis machines are tasked with purifying water from water sources like lakes, rivers, wells, and even the sea. These machines utilize a high-pressure pump that forces brackish or sea water against the surface of a semipermeable membrane containing small pores. Water molecules are only permitted to flow through the small pores, blocking impurities such as salt, particles, minerals, and other organics from passing through. These small pores have a strong capability of rejecting bacteria and disease-causing pathogens. At the end of this process, clean, purified water emerges on the lower-pressured side while salts, minerals, and other organics are thrown into a drain following a brine stream.

High Capacity Technology

The RO-200 series can be customized based on individual design to include chemical dosing, cleaning skids, antiscalant and more. These reverse osmosis machines can accommodate between 600 and 15,000 GPD, with feed water TDS of 1000 ppm to 5000 ppm. These features have the capability of removing hardness, chlorine, odors, color, iron, and sulfur. Economical and efficient, RO-200 commercial reverse osmosis systems acquire the latest in RO technology to remove dissolved salts, particles, organics, minerals, solids and other contaminants from water. Pure Aqua uses membranes from the most reputable manufacturers such as Dow Filmtec and Hydranautics both of which operate out of the USA.

Available Skid Mounted Systems

Pure Aqua manufactures skid-mounted RO-200 reverse osmosis machines as a turnkey systems individually designed to meet your specifications and are always 100% pre-tested to ensure accurate connections. Depending on the applications, the skid-mounted system might include all pre and post-treatment components, including feed pump, chemical dosing, media filter, carbon filter, water softener, RO, TDS blending mechanism, pH correction, post UV disinfection, ozonation, storage tank and other optional components. The skid mounted system comes complete pre-assembled, piped, wired and ready to operate.

Operation Specifications

  • Max. feed water temperature: 42°C

  • Equipment upgrade for TDS up to 5,000 ppm

  • Hydrogen Sulfide must be removed

  • Max. Silica tolerance: 25 ppm @ 60% recovery

  • Feed water TDS: 0-2,000 ppm

  • Operating pressure: 150 to 250 psi

  • pH tolerance range: 3-11

  • Max. Iron content: 0.05 ppm

  • Feed water pressure: 20 to 80 psi

  • Hardness over 1 GPG requires water softener

  • Turbidity should be removed

  • Operate at higher TDS by lowering recovery


Commercial Brackish RO Systems RO-200 Series

Model Number

Permeate Flow Rate

Membranes

Motor Rating at 1,000 ppm

GPD

M3/D

Size

Qty.

60Hz (hp)

50Hz (kw)

TW-0.6K-125

600

2

2.5"x40"

1

1/2

1/2

TW-1.2K-225

1,200

5

2.5"x40"

2

1/2

1/2

TW-1.8K-325

1,800

7

2.5"x40"

3

3/4

3/4

TW-1.5K-140

1,500

6

4"x40"

1

1

1

TW-3.0K-240

3,000

11

4"x40"

2

1

1

TW-4.5K-340

4,500

17

4"x40"

3

1.5

1.5

TW-6.0K-440

6,000

23

4"x40"

4

1.5

1.5

TW-7.5K-540

7,500

28

4"x40"

5

2

2

TW-9.0K-640

9,000

34

4"x40"

6

2

2

TW-12.0K-840

12,000

45

4"x40"

8

3

3

TW-15.0K-1040

15,000

57

4"x40”

10

3

3

For more information, please see our PDF in the "Download" tab

Note: If the feed water TDS exceeds 2,000 ppm, the system model number changes to BW-XXXK-XXXX, and a suffix is added to the end of the model number: “-5” is added if the TDS is 5,000 ppm or less. Example: Required system to produce 9,000 GPD with a feed water TDS of 5,000 ppm, the corresponding model number is: “BW-9.0K-640-5”.

Standard Features:

Available Options:

  • Pre/post-treatment and pump pressure gauges

  • FRP/SS pressure vessel

  • Tagging and identification of instrumentation

  • Heavy duty high pressure tubing

  • Corrosion resistant high pressure throttling valve

  • Pretreatment lockout

  • Powder coated carbon steel frame

  • 2.5"/4" TFC spiral wound membranes

  • Electric inlet solenoid valve

  • Recycle valve (standard up to 4.5K GPD)

  • Heavy duty 5 micron cartridge pre-filter

  • Corrosion resistant high pressure pump

  • 220V/1Ph/60Hz power supply

  • Factory tested

  • Low pressure switch

  • Product and reject flow meters

  • Ozonation system / UV sterilizers

  • Water softeners

  • Post DI polishers

  • Blending: feed/product

  • High pressure switch

  • pH or ORP meter

  • Recycle flow meter

  • Tank float switch

  • 220V or 460v 3Ph/60Hz power supply

  • 220-240V/1Ph/50Hz power supply

  • 380-415V/3Ph/50Hz power supply

  • Media filters

  • Pre-piped skid system

  • Automatic flush

  • Export wood crating

The ideal applications for commercial reverse osmosis machines include:

  • Power Plants

  • Metal Finishing

  • EDI Pre-treatment

  • Rinse Water

  • Boiler Feed Water

  • Laboratory

  • Plating Operations

  • Cooling Towers

  • Food and Beverage

  • Electronics

  • Safe Drinking Water

  • Chemical Blending

  • Spot Free Product Rinse

  • Mining Industry

  • Beverage Production and Bottled Water

  • Pharmaceutical

  • Ice Manufacturing

  • Ion Exchange Pre-treatment

By: Ibrahim Khafagau
United States of America
Quality:
Delivery:
Service:

Great spot free system for my carwash
I have purchased a complete reverse osmosis system for my carwash spot free system. Our customers are extremely happy with the carwash, no spots at all on the cars.

The system included all pretreatment before the RO system.

Thank you for the great system.

By: Muhammad Naveed Hyder
Pakistan
Quality:
Delivery:
Service:

request for Help
good system
Related Products
Commercial Reverse Osmosis Systems RO-200 Series Projects
GET A FREE QUOTE NOW

Please use the form to provide us with some basic info and one of our representatives will get back to you shortly.

+1 714-432-9996
2230 South Huron Dr. Santa Ana California 92704 USA
sales@pureaqua.com view map




Pure Aqua, Inc. Address 2230 South Huron Dr. Santa Ana California 92704 USA
DON'T MISS A THING

Join our social networks and follow us