Nanofiltration Systems

Nanofiltration NF Systems

The fundamental principle of Nanofiltration membrane's technology is the use of pressure to separate soluble ions from water through a semi permeable membrane. The membrane, operates under a different hydraulic profile which is also known cross flow filtration, unlike a dead end filter.

Most Nanofiltration membranes are composite materials supported by polymer substrate and manufactured in a spiral design as opposed to a flat sheet or tube geometry. The predominant model used today for industrial applications is the spiral configuration. To ascertain further understanding of nanofiltration systems, you will need to be aware of the following information.

Like RO, and unlike UF, Nanofiltration Systems will recover a percentage of the feed water. Most all NF membranes are of a spiral wound configuration.

NF-300 System
NF-300 SERIES NANOFILTRATION SYSTEMS
COMMERCIAL SCALE NANOFILTRATION

Daily Capacity Range:
11,700 to 28,800 GPD
(44 to 109 M³/day)

  • Membrane Diameter: 4"
  • Operating Pressure: up to 300 PSI
  • Microprocessor Control Panel
NF-400 System
NF-400 SERIES NANOFILTRATION SYSTEMS
INDUSTRIAL MEMBRANE NANOFILTRATION

Daily Capacity Range:
25,200 to 155,700 GPD
(95 to 589 M³/day)

  • Membrane Diameter: 8"
  • Operating Pressure: up to 300 PSI
  • Microprocessor Control Panel
NF-500 System
NF-500 SERIES NANOFILTRATION SYSTEMS
INDUSTRIAL SCALE NANOFILTRATION

Daily Capacity Range:
190,000 to 855,000 GPD
(719 to 3,236 M³/day)

  • Membrane Diameter: 8"
  • Operating Pressure: up to 300 PSI
  • PLC Control Panel

Pure Aqua has over 20 years of experience as a global supplier of industrial and commercial nanofiltration systems for the removal of unwanted impurities from water. Our NF systems ensure the production of clean and potable water for any type of application in the water treatment industry. Check out our selection of nanofiltration systems for commercial establishments and industrial plants to meet your water treatment needs.

Nanofiltration (NF), in water treatment, “bridges” a gap between ultrafiltration and reverse osmosis membranes. It is sometimes referred to as a loose or lower rejecting RO membrane. It could also be called a tight UF, as NF membrane pore size ranges from .01 to a little less than .001. Generally, an NF membrane system lets more salt pass than an RO membrane. In addition, an NF membrane element will produce the same quantity of product at 50 to 70% the applied pressure as an RO water treatment system.

There are applications where a 75% rate of salt rejection is preferable to 95 to 99%, especially when it is achieved using only half of the energy. Unlike with RO membrane elements, the NF offerings of the major membrane manufacturers are quite different in performance from company to company. With RO membrane elements, any model with less than 99.5% sodium chloride rejection, especially with seawater membranes, is considered inferior. In the case of NF, there is a “place” for any membrane with a NaCl rejection rate of 40%, or more. Nanofiltration has also been called a “softening” membrane as while its salt rejection may be 80% or less, hardness rejection will often remain well over 90%.

Questions & Answers

What is nanofiltration membrane?

Nanofiltration membranes are utilized for the filtration of water with low total dissolved solids (TDS) for the purposes of eradicating organic substances and softening water. Nanofiltration is usable in many water and wastewater treatment industries for the practical removal of ions and organic material. It has also been adopted as pretreatment to RO. Other than water purification, nanofiltration membranes are also used in the manufacturing production of food & beverages, and pharmaceuticals.

Difference between nanofiltration and reverse osmosis?

While nanofiltration and reverse osmosis systems have similar designs and operation uses, there are some notable differences between the two. The primary distinction is that nanofiltration is not as rigid as reverse osmosis. It functions with less feed water pressure and is incapable of removing single charge ions from the water as definitely as reverse osmosis membranes.

While up to 99% of chlorides and sodium are removed by reverse osmosis systems, nanofiltration membranes typically remove only 50% to 80%. This percentage relies on the type of material and manufacturing of the membrane. However, due to its effectiveness in removing multiple charge ions, nanofiltration is the preferred choice for removing hardness from water while not affecting the total dissolved solids content than would reverse osmosis. 

Examples of Nanofiltration NF Applications:

Application Permeate Concentrate Benefits of NF
Whey / Whey Permeate Salty wastewater Desalted whey concentrate Allows the recovery of lactose and whey protein concentrate with reduced salt content
Textile Dyes Water, salts, BOD, COD and color NF is used to desalt  dyes resulting in a higher value product
Caustic cleaning solutions Caustic cleaning solution BOD, COD, suspended solids, caustic cleaner Allows caustic cleaning solution to be recycled resulting in reduced cleaning chemical costs
Recycle of acid solutions Acid solution BOD, COD, calcium, suspended solids, acidic water Allows acid solution to be recycled resulting in reduced cleaning chemical costs
Water Softened water Hard water Potable water production. Softened water reduces scaling on equipment and heat exchange surfaces
Antibiotics Salty waste product Desalted, concentrated Antibiotics NF produces high value pharmaceutical products