call +1 714 432 9996 Get a Quote

Sub Title: Industrial Water Softeners

Pure Aqua offers water softeners and water softener systems that can provide clean water for your industrial applications. We have several satisfied clients all around the world that use our water softener solutions.

SKU: SF-100S Category: Ion Exchange Systems > Water Softeners Brand: Pure Aqua Other Names: Municipal Stainless Steel Duplex Softener, Industrial Water Softener System, Triplex Resin Ion Exchange Machine, Fleck Control Valve Water Softening Unit


Uses for Industrial Water Softeners SF-100S Series

Pure Aqua's water softeners treat the water by removing hardness using resin. The resin replaces the hardness in the water with salt which is regenerated periodically. The softened water can then pass through an RO system to remove the salt without the risk of scaling. Softeners can be used in a variety of services including: industrial, municipal, and institutional applications.

Softener Sizing

A softener is sized on the basis of two different parameters:
  • Exchange capacity, which is the quantity of water delivered between regenerations
  • Maximum flow rate, which is the maximum quantity of water required at any peak usage period.
Exchange capacity depends upon the amount of ion exchange resin in the softener and quantity of salt used for resin regeneration. Maximum flow rate is an important datum in case of non-continuous water delivery and is measured in gallons per minute (GPM).
Pure Aqua supplies a full line of standard and fully customizable water softening systems, all of which are engineered using advanced 3D computer modeling software for accurate and customized solutions.


Materials of Construction
Operating Specifications
  • Carbon steel resin tank with blue outer coating
  • NSF rated interior epoxy coating
  • Face piping: PVC/CPVC or galvanized steel
  • Internal distributors: PVC/CPVC
  • Control valves: Noryl or steel
  • Brine Tank: Polyethylene, plastic internals
  • Inlet Pressure: 30-100 psi
  • Temperature: 35-110°F
  • Feed water should not exceed 3,000 ppm TDS
  • Service flow rates/ranges based on the cu.ft. of the tank/filter bed
  • Slower flow rate per cu.ft. = better filtration
  • 2 GPM/cu.ft. = minimum “superior softening"

Industrial Water Softeners SF-100S Series
Model Number Exchange
Capacity @
15lbs/cu.ft. Grain
Flow Rate (GPM) Pipe Size Resin
Qty.
(ft3)
Tank
Size
(inch)
Salt
Storage
(lbs)
Service BW
Max Min. Cont. Peak Serv. Drain Softener Brine
WS24-240-1.5 240000 160000 40 70 15 1.5" 1" 8 24x54 24x50 900
WS24-240-2 65 120 2" 1"
WS24-240-2.5 80 170 2.5" 1"
WS30-300-1.5 300000 200000 40 70 20 1.5" 1" 10 30x54 24x50 900
WS30-300-2 65 120 2" 1"
WS30-300-2.5 80 170 2.5" 1"
WS30-300-3 120 270 3" 1"
WS30-450-1.5 450000 300000 40 70 20 1.5" 1" 15 30x60 30x60 1600
WS30-450-2 65 120 2" 1"
WS30-450-2.5 80 170 2.5" 1"
WS30-450-3 120 270 3" 1"
WS36-600-1.5 600000 400000 40 70 30 1.5" 1.5" 20 36x60 39x60 2700
WS36-600-2 65 120 2" 1.5"
WS36-600-2.5 80 170 2.5" 1.5"
WS36-600-3 120 270 3" 1.5"
WS36-750-2 750000 500000 65 120 30 2" 1.5" 25 36x72 39x60 2700
WS36-750-2.5 80 170 2.5" 1.5"
WS36-750-3 120 270 3" 1.5"
WS42-900-2 900000 600000 65 120 45 2" 2" 30 42x60 42x60 3100
WS42-900-2.5 80 170 2.5" 2"
WS42-900-3 120 270 3" 2"
WS42-1050-2 1050000 700000 65 120 45 2" 2" 35 42x72 42x60 3100
WS42-1050-2.5 80 170 2.5" 2"
WS42-1050-3 120 270 3" 2"
WS48-1200-2 1200000 800000 65 120 60 2" 2" 40 48x72 50x60 4500
WS48-1200-2.5 80 170 2.5" 2"
WS48-1200-3 120 270 3" 2"
WS48-1200-4 250 500 4" 2"
WS54-1500-2 1500000 1000000 65 120 80 2" 2" 50 54x72 50x60 4500
WS54-1500-2.5 80 170 2.5" 2"
WS54-1500-3 120 270 3" 2"
WS54-1500-4 250 500 4" 2"
WS60-1950-2 1950000 1300000 65 120 100 2" 2.5" 65 60x72 50x60 4500
WS60-1950-2.5 80 170 2.5" 2.5"
WS60-1950-3 120 270 3" 2.5"
WS60-1950-4 250 500 4" 2.5"
WS66-2400-2.5 2400000 1600000 80 170 120 2.5" 3" 80 66x72 50x60 4500
WS66-2400-3 120 270 3" 3"
WS66-2400-4 250 500 4" 3"
WS66-2400-6 400 750 6" 3"
WS72-3000-3 3000000 2000000 120 270 140 3" 3" 100 72x72 87x53 7500
WS72-3000-4 250 500 4" 3"
WS72-3000-6 500 800 6" 3"
WS78-3600-3 3600000 2400000 120 270 165 3" 3" 120 78x72 87x53 7500
WS78-3600-4 250 500 4" 3"
WS78-3600-6 500 900 6" 3"
WS84-4200-3 4200000 2800000 120 270 190 3" 4" 140 84x72 87x53 7500
WS84-4200-4 250 500 4" 4"
WS84-4200-6 500 1000 6" 4"


Standard Features
Available Options
  • The Industrial Steel Tank Automatic Water Softener (SF-100S Series) softeners are designed as fully automatic units either with timer or meter control. The timer control initiates softener regeneration at any predetermined time - on any or every day. The metered models start regeneration based on the total gallons used.
  • The steel mineral tank is engineered for a 100 psi working pressure and is tested to 150 psi. It is equipped with a manhole in the upper dome.
  • The interior of the tank is coated with epoxy for protection against rust and corrosion. The exterior has a rust inhibiting primer coat.
  • A premium grade sulfanated nonphenolic polystyrene type resin is contained in the mineral tank. The resin will deliver 30,000 grains per cubic foot when brined at a rate of 15 lbs. per cubic foot.
  • The brine tank is a combination of high density polystyrene brine measuring tank and a brine valve, including an air eliminator valve and a safety brine refill shut off to prevent tank overflow.
  • The automatic regeneration controller features a choice of 7 or 12 day calendar wheels. Time of regeneration and length of time for each regeneration cycle are fully adjustable.
  • The under drain utilizes either a hub & lateral or a header & lateral system to evenly distribute water and prevent resin loss, and to insure minimal pressure drop at peak flow rates.
  • Duplex, triplex or multi units
  • Skid mounted, plumbed, wired systems
  • ASME code stamped resin tanks
  • PLC control system
  • Alternate water meter types
  • Brine pump systems
  • PVC or CPVC face piping
  • Stainless steel face piping
  • Stainless steel internal distribute piping
  • Butterfly control valves
  • Inline hardness monitor
  • Unistrut channel supports


The ideal applications for a Water Softener include:
  • Apartments/Condominiums
  • Groundwater remediation
  • Hospitals
  • Laundries
  • Boiler Feedwater
  • Contact process water
  • Car Washes
  • RO Pre-treatment
  • Cooling Tower


Video on Twin Alternating Water Softener Kuwait

Twin Alternating Water Softener was manufactured and included with the industrial steel multi-media filter and mixed bed deionizer for a major company in Kuwait. Each 24" softener tank has an exchange capacity of 270,000 grains and produces 50 GPM. While one tank works, the other is regenerating. ..more->